DLink DGS-1210-52MP 52-Port 10/100/1000 Mbps Gigabit Smart Switch 370W PoE budget – Power budget 370W – 48 x PoE 10/100/1000Mb

The DGS-1210 Series Gigabit Smart+ Switches with Fibre Uplinks is the latest generation of D-Link smart switches featuring D-Link Green 3.0 technology.

The series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. IPv6 Ready Logo Program Approved, support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6.

By offering multiple management options, the Smart+ Switches allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1210 Series Smart+ Switches provide functionality, security, and manageability for a fraction of the standard cost of ownership.

The DGS-1210 Series Gigabit Smart+ Switches with Fibre Uplinks includes a range of high power budget PoE-enable switches for businesses looking to power VoIP phones, wireless access points or network cameras.

The DGS-1210-10P is a 8-port Smart PoE+ Switch that provides 8 PoE-enabled ports that can supply power of up to 30 W each.

Whereas the DGS-1210-28P is a Smart PoE+ Switch with a power budget of 187 W, that provides 24 PoE-enabled ports with ports 1-4 supporting up to 30 W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

Easy Management

The D-Link Gigabit Smart+ Switches with Fibre Uplinks is designed for easy management. All configurations can be made through a Web interface regardless of the host PC’s operating system.

Furthermore, the web UI contains ten language options to make operations more straightforward. During the first installation, the SmartConsole Utility will automatically discover all D-Link Smart+ Switches in the network, allowing administrators to assign IP addresses and the subnet mask quickly.

It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. The SmartConsole Utility’s important management commands, such as downloading firmware or a configuration file, offer a sophisticated method of batch operations for multiple switches.

Energy Saving

DGS-1210 Series Gigabit Smart+ Switches with Fibre Uplinks are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology.

Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required.

For environments not fully supporting the standard, DGS-1210 Series Smart+ Switches offer advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles.

The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.

Auto Surveillance VLAN and Voice VLAN

The process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart+ Switches. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities.

ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN.

This ensures that surveillance video streams will not be affected when ordinary data traffic is at their highest levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.

Exclusive Layer 2 Features

Equipped with a complete line-up of L2 features, the DGS-1210 Series switches include IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP).

The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss.

Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port.

The Cable Diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.

Secure your Network

D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers.

In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source.

This protects important data from being stolen by Man-in-the-Middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.

• Features
  
  Green Technology
  
• Power saving via the following features:
• Link Status detection
• LED Shut-Off
• Port Shut-Off
• System Hibernation
• Time-based PoE
• Security Features
• Access Control List secures network
• D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast Flooding
• Port Security supports 64 MACs per port
• ARP Spoofing Prevention
• Intuitive Management
• D-Link Network Assistant Utility or Web-based GUI
• Built-in SNMP MIB for remote NMS (D-View 6.0)
• Compact CLI through Telnet

Advanced Features

• Auto Surveillance VLAN
• Loopback Detection automatically disables a port when a loop is detected
• Cable Diagnostics allows administrators to determine cable status
• SFP ports for flexibility
• Auto MDI/MDIX
• Interface
• Number of 10/100/1000BASE-TX ports
• DGS-1210-52MP – 48 ports
• Number of SFP ports:
• DGS-1210-52MP – 4 ports
• PoE Supported Models (Standard(s)/Number of Ports/Maximum Power Budget)
• DGS-1210-52MP (802.3af/802.3at/52 ports/370W)
• Performance
  
• Switch Capacity – 104 Gbps
• 64-Byte Packet Forwarding Rate: 77.4 Mpps
• MAC Address Table Size – 16K
• Packet Buffer: 3 MB per device
• Jumbo Frame: Up to 9,216 Bytes
• Physical & Environmental
• Power Consumption (Standby/Maximum): 48.9W / 483.1W (PoE)
• Power Input: 0 to 240 VAC, 50/60HZ internal universal power supply
• Dimensions (W x D x H) – 440 x 430 x 44 mm
• Weight – 5.78 kg
• Ventilation – smart fans
• Heat Dissipation – 1648.23 BTU per hour
• Temperature
• Operating: -5° to 50°C (23° to 112°F)
• Storage: -20° to 70°C (-4° to 158°F )
• Humidity
• Operating: 0% ~ 95% non-condensing
• Storage: 0% ~ 95% non-condensing
• Certification
• CE Class A, VCCI Class A, FCC Class A, cUL, CE (LVD), BSMI, CCC, C-Tick
• Software Feature – L2 Features
• MAC Address Table – 16K entries
• IGMP Snooping
• IGMP v1/v2 Snooping
• Supports 256 IGMP groups
• Supports at least 64 static multicast addresses
• IGMP per VLAN
• Supports IGMP Snooping Querier
• Loopback Detection
• 802.3ad Link Aggregation:
• DGS-1210 28/28P: Maximum of 14 groups/8 ports per group
• DGS-1210 52/52MP/52P: Maximum of 26 groups/8 ports per group
• DGS-1210 -10/10P: Maximum of 5 groups/8 ports per group
• LLDP
• LLDP-MED:
• Jumbo Frame – Up to 9,216 bytes
• Spanning Tree Protocol
• 802.1D STP
• 802.1w RSTP
• Flow Control
• 802.3x Flow Control
• HOL Blocking Prevention
• Port Mirroring
• One-to-One
• Many-to-One
• Supports Mirroring for Tx/Rx/Both
• Multicast Filtering
• Forwards all unregistered groups
• Filters all unregistered groups
• Configurable MDI/MDIX – MLD snooping v1/v2 (256 groups)
• VLAN
• 802.1Q
• VLAN Group
• Max. 256 static VLAN groups
• Configurable VID from 1 – 4094
• Asymmetric VLAN
• Auto Voice VLAN
• Max. 10 user-defined OUI
• Max. 8 default OUI
• Auto Surveillance VLAN
• Quality of Service (QoS)
• 802.1p Quality of Service
• 8 queues per port
• Queue Handling
• Strict
• Weighted Round Robin (WRR)
• Bandwidth Control
• Port-based (Ingress/Egress, min granularity 10/100/1000 is 64 Kbps)
• QoS based on:
• 802.1p Priority Queues
• DSCP
• ToS
• Pv6 Traffic Class
• TCP/UDP port
• L3 Features
• IP Interface
• Supports 1 interface
• IPv6 Neighbor Discovery (ND)
• Access Control List (ACL)
• Max. 50 access list
• Max. 768 rules shared by IPv4, MAC and IPv6
• Each rule can only be associated with a single port
• ACL based on
• 802.1p priority
• VLAN
• MAC address
• Ether type
• IP address
• DSCP
• Protocol type
• TCP/UDP port number
• IPv6 Traffic Class
• Security
• Broadcast/Multicast/Unicast Storm Control
• D-Link Safeguard Engine
• DHCP Server Screening
• IP-MAC-Port Binding (Smart Binding)
• Supports 512 address binding entries
• ARP Inspection
• ARP + IP Inspection
• DHCP Snooping
• 802.1X Port-based Access Control
• ARP Spoofing PreventionMax. 64 entries
• Traffic Segmentation
• SSH v2SSL
• v1/v2/v3
• Port Security
• up to 64 MAC addresses per port
• Duplicate address detection

AAA

802.1X Authentication
Supports local/RADIUS database
Supports port-based access control
Supports EAP, OTP, TLS, TTLS, PEAP
IPv6 RADIUS Server
Support MD5 authentication

MIB/RFC Standards
RFC 783 TFTP
RFC 951 BootP/DHCP Client
RFC 1157 SNMP v1, v2, v3
RFC 1213 MIB II
RFC 1215 MIB Traps Convention
RFC 1350 TFTP
RFC 1493 Bridge MIB
RFC 1769 SNTP
RFC 1542 BootP/DHCP Client
RFC 1901 SNMP v1, v2, v3
RFC 1907 SNMP v2 MIB
RFC 1908 SNMP v1, v2, v3
RFC 2131 BootP/DHCP Client
RFC 2138 RADIUS Authentication
RFC 2139 RADIUS Authentication
RFC 2233 Interface Group MIB
RFC-2246 SSL
RFC 2475
RFC 2570 SNMP v1, v2, v3
RFC 2575 SNMP v1, v2, v3
RFC 2598 CoS
RFC 2618 RADIUS Authentication
RFC 2819 RMON v1
RFC 2865 RADIUS Authentication
RFC 3164 System Log
RFC 3195 System Log
RFC 3411-17 SNMP
D-Link Private MIB
LLDP MIB
Zone Defense MIB
2233 Interface Group MIB

OAM
Cable Diagnostics
Factory Reset

Management
Web-based GUI
D-Link Network Assistant Utility
Compact CLI
Telnet Server
TFTP Client
Configurable MDI/MDIX
SNMP
Supports v1/v2c/v3
SNMP Trap
Backup/Upgrade firmware
Smart Wizard
Upload/Download Configuration file
System Log
Max. 500 log entries
BootP/DHCP Client
SNTP
ICMP v6
IPv4/v6 Dual Stack
DHCP Auto Configuration
Time Setting
SNTP
RMONv1
Trusted Host

Green V3.0 Technology
Power Saving by:
Link Status
Time-based PoE: PoE ports can be turned on/off by port or system through schedule
LED Shutoff
System Hibernation
Port Shutoff